Shift schedule
BeforeThe automatic keeps the factory shift schedule.
AfterShift points and shift pressure are edited in VCM Editor, on a transmission the software supports.
This depends on the controller and the parts fitted to the car.
VCM Suite calibration for controllers that can be written without an unlock service.
01 / What we tune
We connect an HP Tuners MPVI interface and edit the calibration in VCM Suite. VCM Editor can change ignition timing, the fuel curve, automatic shift points and shift pressure, RPM limits, cooling-fan temperatures and idle speed. VCM Scanner logs the result. We take Ford vehicles from 2011 through 2020 and GM vehicles from 2001 through 2018 when the controller does not need an HP Tuners unlock service, and LS swap calibrations on a controller in that same position.
In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.If HP Tuners requires an unlock service before VCM Suite can write the controller, we do not take the car.
VCM Editor
LS swaps
Supported range
02 / Examples of what we can do
Examples only. Each one depends on the controller and the parts on the car. No power figures.
BeforeThe automatic keeps the factory shift schedule.
AfterShift points and shift pressure are edited in VCM Editor, on a transmission the software supports.
This depends on the controller and the parts fitted to the car.
BeforeIdle speed and fan temperatures are the factory calibration.
AfterIdle speed, and the temperatures where the fans come on, can be edited in VCM Editor.
This depends on the controller and the parts fitted to the car.
BeforeThe controller still carries the calibration from the vehicle it came out of.
AfterThe calibration is rewritten for the swapped engine. We do not take a controller that first needs the HP Tuners unlock service.
This depends on the controller and the parts fitted to the car.
DM us on Instagram for the quote. WhatsApp is the second option.
DM us on Instagram Book in person on WhatsApp03 / Tuning tools
Three in-person services. The tool depends on the car.
A standalone ECU. We set the calibration in MTune, and we can advise on the install.
BMW maps on a DME that does not need an unlock.
04 / How it works
In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.
Send the year, model, engine and what you want changed.
We reply with a yes or a no for that car.
Once the quote is agreed, we meet in Abu Dhabi, Al Ain or Dubai.
We read the file and save it, write the calibration, and go through the log with you.
A list of what was changed.
05 / FAQ
We do not tune emissions equipment. We do not promise a power figure. We do not switch off safety systems. ECU tuning is a separate in-person service from coding. We save the stock file before we write, and if we cannot save it we do not tune the car. Changing engine power can need Licensing Authority approval before the car is used on the road. You arrange that approval.
Ford from 2011 through 2020 and GM from 2001 through 2018 when the controller does not need an HP Tuners unlock service, plus LS swap calibrations on a controller that does not need that service.
HP Tuners' upgrade service modifies the original module, usually by removing it and sending it to them, so VCM Suite can write to it. We do not take those jobs. Examples they publish include the GM E41 on the 2017 and newer 6.6 L5P, the E90, E93 and E46 truck controllers they name, the T87A and T93 transmissions, and the Ford MD1 on the 2020–2021 6.7 Power Stroke.
No. We do not quote one.
No. This is an independent workshop. We are not an HP Tuners dealer.
HP Tuners, VCM Suite and MPVI are names of their owner. n3worx is an independent workshop and is not an HP Tuners dealer or affiliated with BMW AG, Ford Motor Company or General Motors. Terms
In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.
DM us on Instagram for the quote. WhatsApp is the second option.
DM us on Instagram Book in person on WhatsApp All tuning tools F-150 coding with FORScan