Turbocharger on a dark engine

MaxxECU
in Dubai.

A standalone engine computer, set up in MTune in person.

01 / What we set up

What we set up

MaxxECU builds standalone ECUs that replace the factory engine computer. Their compare chart runs from MaxxECU MINI through STREET, SPORT, RACE and PRO, and includes the GEN2 units. The software is MTune. We match the unit to the engine and set the calibration in person.

In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.

MTune. Only what MaxxECU publishes for that unit. The install can be at your workshop. We advise on it.

  • 01 Fuel and ignition. The unit calculates both, and that is what we set in MTune.
  • 02 Boost control and flex fuel, where the unit supports them.
  • 03 E-Throttle motor outputs are listed from SPORT upward on the MaxxECU compare chart. The MINI and the STREET do not list those outputs.
  • 04 MaxxECU describes CAN support for gauges, transmissions and OEM integration.
  • 05 Plug-in units for some cars, and a universal unit for the rest.

02 / Examples of what we can do

Examples of what we can do

Examples only. Each one depends on the controller and the parts on the car. No power figures.

01

A swapped engine

BeforeThe factory computer cannot run the swapped engine.

AfterA MaxxECU standalone runs fuel and ignition. We set it in MTune.

This depends on the controller and the parts fitted to the car.

02

Boost and flex fuel

BeforeThe build needs boost control or an ethanol blend the factory computer cannot run.

AfterBoost control and flex fuel are set in MTune on a unit that supports them.

This depends on the controller and the parts fitted to the car.

03

An electronic throttle

BeforeThe engine uses an electronic throttle.

AfterDrive-by-wire motor outputs are listed from SPORT upward, not on the MINI or the STREET.

This depends on the controller and the parts fitted to the car.

DM us on Instagram for the quote. WhatsApp is the second option.

DM us on Instagram Book in person on WhatsApp

04 / How it works

How it works

In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.

  1. 01

    DM us on Instagram

    Send the year, model, engine and what you want changed.

  2. 02

    We say whether we can take it

    We reply with a yes or a no for that car.

  3. 03

    Agree a time and a place

    Once the quote is agreed, we meet in Abu Dhabi, Al Ain or Dubai.

  4. 04

    We meet at the car

    We read the file and save it, write the calibration, and go through the log with you.

  5. 05

    You get a written list

    A list of what was changed.

05 / FAQ

FAQ

We do not tune emissions equipment. We do not promise a power figure. We do not switch off safety systems. ECU tuning is a separate in-person service from coding. We save the stock file before we write, and if we cannot save it we do not tune the car. Changing engine power can need Licensing Authority approval before the car is used on the road. You arrange that approval.

When is a standalone the right tool?

When an engine computer replaces the factory one: a swap, or a build whose hardware the factory unit cannot run. We look at the build with you before a unit is chosen.

Do you fit the harness?

We can advise on the installation. Your workshop can fit the unit, or it can be fitted in person with us. The calibration is set in MTune at the car.

Are you a MaxxECU dealer?

No. This is an independent workshop. We are not a MaxxECU dealer.

In person across Abu Dhabi, Al Ain and Dubai. DM to set up a time and place.

MaxxECU
in Dubai.

DM us on Instagram for the quote. WhatsApp is the second option.

DM us on Instagram Book in person on WhatsApp All tuning tools